DAP Tips and Tricks

Discussion about Mediachance DAP

Re: DAP Tips and Tricks

Postby smmsamm » Thu Aug 24, 2017 4:39 am

LigH wrote:You will always lose quality, technically ... but just resampling without any obvious brush strokes, try the "Realism" template, it only uses slight image filters.

Thank you
smmsamm
 
Posts: 320
Joined: Tue Oct 26, 2010 7:58 pm

Re: DAP Tips and Tricks

Postby Peter-GZ » Thu Aug 24, 2017 5:38 am

and looking by www.benvista.com, under PhotoZoom Pro7 or PhotoZoom Classic 7. Try before you buy.
All my edited photos are photographs by me.
Peter-GZ
 
Posts: 536
Images: 3
Joined: Sat Apr 27, 2013 10:02 am
Location: Sindorf, Germany

Re: DAP Tips and Tricks

Postby smmsamm » Thu Aug 24, 2017 7:44 am

Peter-GZ wrote:and looking by http://www.benvista.com, under PhotoZoom Pro7 or PhotoZoom Classic 7. Try before you buy.


thank you too
smmsamm
 
Posts: 320
Joined: Tue Oct 26, 2010 7:58 pm

Remove unwanted objects from a source image inside DAP5

Postby tartine78 » Thu Dec 28, 2017 4:35 pm

Hello,

as explain in the thread http://www.mmbforums.com/viewtopic.php?f=5&t=6995 thanks to Peter-GZ for his help.


I think i found a way to overcome the lack of tool to remove unwanted object on the source image directly into DAP5

here is how:

1. Open your source image as usual

2. go to retouch tab


3. click on "input photo brush (prep)
dap imput.png
dap imput.png (3.79 KiB) Viewed 4318 times

and pant the canvas to let appear your source image

4. use the best settings to recover all your canvas
be sure to change the setting to 100% opacity (not as shown below ;)
dap brush settings.png
dap brush settings.png (3.28 KiB) Viewed 4318 times


5. Now you have access to your "source image" in full canvas

6. You can now use the clone tool to remove unwanted objects
dap clone.png
dap clone.png (1.67 KiB) Viewed 4318 times


7. now that retouch is done you can click on "apply"

8. Go to "painter" tab
9. uncheck "clear canvas on start"
dap painter output.png
dap painter output.png (8.58 KiB) Viewed 4318 times


10. you can now begin the dap process as usual.
tartine78
 
Posts: 31
Joined: Tue Nov 22, 2016 6:26 pm

Re: DAP Tips and Tricks

Postby mitch » Tue Mar 26, 2019 4:55 am

Hi , I want to have a go at modifying an aop
Can I extract the brushes pallet from an existing aop to modify ( is it the Alpha jpg ) shown as <INTERNAL>
Thanks
mitch
 
Posts: 39
Joined: Tue Oct 26, 2010 4:55 am

Re: DAP Tips and Tricks

Postby happyamateur » Tue Mar 26, 2019 1:47 pm

Hi Mitch, yes that is correct.
happyamateur
 
Posts: 96
Joined: Thu Jul 12, 2018 7:17 am

Re: DAP Tips and Tricks

Postby mitch » Tue Mar 26, 2019 2:04 pm

Hi
How do I get the jpg file out of the existing aop, it just shows <INTERNAL>
Thanks
mitch
 
Posts: 39
Joined: Tue Oct 26, 2010 4:55 am

Re: DAP Tips and Tricks

Postby mitch » Thu Mar 28, 2019 6:53 am

Hi
Does the ".pal" file contain the colours and brushes paletts
If so how can I convert the .pal file back to a jpg file (for modification)
Thanks
mitch
 
Posts: 39
Joined: Tue Oct 26, 2010 4:55 am

Re: DAP Tips and Tricks

Postby happyamateur » Thu Mar 28, 2019 12:41 pm

You need a utility to extract the 2 jpegs from the AOP (one is the colour palette the other the brushes). There are a few free ones you can find via Google.
happyamateur
 
Posts: 96
Joined: Thu Jul 12, 2018 7:17 am

Re: DAP Tips and Tricks

Postby mitch » Thu Mar 28, 2019 3:10 pm

Thanks happyamateur
I have tried quite a few online converters with no success
I have downloaded a couple of pal to jpg converters with no success
Can you recommend one that works ( or an I doing something wrong )
Thanks
mitch
 
Posts: 39
Joined: Tue Oct 26, 2010 4:55 am

PreviousNext

Return to Dynamic Auto Painter

Who is online

Users browsing this forum: No registered users and 2 guests

cron